Mahdi Gerdooei | Mechanical Properties of Materials | Best Researcher Award

Published on by Material Scientist

Assoc. Prof. Dr. Mahdi Gerdooei | Mechanical Properties of Materials | Best Researcher Award

Assoc. Prof. Dr. Mahdi Gerdooei | Shahrood university of technology | Iran

Dr. Mahdi Gerdooei is an accomplished Associate Professor of Mechanical Engineering at Shahrood University of Technology in Iran. He earned all of his degrees at Amirkabir University of Technology, where he completed his doctoral research on the effects of strain rate on sheet metal formability. Over nearly two decades, he has held leadership and teaching roles, including founding a laboratory focused on metal forming mechanics. His professional journey includes serving as dean of the mechanical engineering faculty and providing industry consulting on coil-spring design and fatigue analysis. A longstanding member of Iran’s manufacturing and mechanical engineering communities, Dr. Gerdooei’s career bridges rigorous academic research and practical industrial application.

Profiles

SCOPUS

ORCID

GOOGLESCHOLAR

Education

Dr. Gerdooei earned his doctoral degree in Mechanical Engineering from Amirkabir University of Technology, where his research delved into theoretical and experimental aspects of strain rate effects on the formability of sheet metals. Building on a strong postgraduate foundation in hot forging process design, his academic trajectory also includes a rigorous undergraduate degree in Mechanical Engineering from the same university—each stage reinforcing his expertise in deformation mechanics and advanced manufacturing methods.

Professional Experience

Dr. Gerdooei’s professional journey seamlessly integrates academic leadership and industry engagement. He established and directs a specialized Laboratory for Mechanics of Materials and Metal Forming at his university, serving both scientific and industrial communities. As Dean of the Faculty of Mechanical Engineering, he guided academic development and strategic initiatives. Recently, he has extended his expertise to industry by consulting for a spring design and manufacturing company, contributing to vehicle spring design and fatigue analysis, while simultaneously leading process development for new engineering products.

Research Interests

Dr. Gerdooei’s research interests are rooted in advanced forming processes, including bulk and sheet metal forming, and extend to spring design, biomaterial manufacturing, and structural failure analysis. He is particularly drawn to biomaterial production for dental implants and the design of springs from novel materials. Fatigue and failure of structures are studied using both macroscopic and micromechanical approaches. His work also engages experimental and numerical methods to explore strain-rate effects and formability across diverse materials.

Award

Dr. Gerdooei has earned recognition through his leadership and scholarly contributions. He founded a research laboratory and guided the mechanical engineering faculty as dean. His membership in national engineering societies reflects his esteemed standing in Iran’s professional community. These accomplishments indicate his significant impact in advancing both academic research and practical engineering applications.

Publication Top Notes

Enhancing plasticity modeling of DC04 steel using strain-dependent Hill 1948 and BBC 2005 yield criteria: a novel 2D-DIC approach to track anisotropy

Journal: International Journal of Solids and Structures 
Authors: Shahram Amirabdollahian; Mahdi Gerdooei

Innovative dual-pressure method for T-shaped branch production using elastomeric tools

Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 
Authors: Mirsadegh Akbarian Kuhkheyli; Mahdi Gerdooei; Seyed Vahid Hosseini; Hasan Ghafourian Nosrati

Rubber mandrel and internal pressure effects on thin-walled tube bending: a comparative study

Journal: The International Journal of Advanced Manufacturing Technology 
Authors: Majid Askari Sayar; Mahdi Gerdooei; Hamidreza Eipakchi; Hasan Ghafourian Nosrati

Analytical approach to investigate the effects of through-thickness stress on springback in bending of isotropic sheet metal

Journal: The International Journal of Advanced Manufacturing Technology 
Authors: Mohammad Reza Movahedi; Mahdi Gerdooei

Implementation of the extended maximum force criterion (EMFC) for evaluating the pressure-dependent forming limit diagrams (PD-FLD) in the tube bulging process

Journal: The International Journal of Advanced Manufacturing Technology 
Authors: Iman Abbasi; Mahdi Gerdooei; Hasan Ghafourian Nosrati

Conclusion

Dr. Mahdi Gerdooei exemplifies a professional who melds academic rigor with industrial relevance. His deep expertise in mechanical engineering—especially metal forming, plasticity, and biomaterials—complements his roles as educator, researcher, and consultant. His leadership in establishing a materials and forming lab and steering academic programs reflects his commitment to innovation and collaboration. Through his scholarly output and engagement with industry, Dr. Gerdooei continues to drive forward both theoretical development and practical engineering solutions.

Assist. Prof. Dr Naveed Ahmed | High-Performance Materials | Best Researcher Award

Published on by Material Scientist

Assist. Prof. Dr Naveed Ahmed | High-Performance Materials | Best Researcher Award

Assist. Prof. Dr. Naveed Ahmed is a medical microbiologist and research scientist with extensive expertise in infectious diseases, antimicrobial resistance, vaccine design, and nanomedicine. Currently serving at the University of Tabuk, Saudi Arabia, he combines academic leadership with impactful research collaborations across multiple countries. He has authored numerous high-impact Q1/Q2 publications, holds multiple copyrights, and is actively engaged in global health initiatives, including as a GBD Senior Collaborator and a Registered Scientist (UK). His multidisciplinary work spans from molecular microbiology to translational medicine.

Assist. Prof. Dr Naveed Ahmed | University of Tabuk | Saudi Arabia

Profiles

SCOPUS

ORCID

Education

Dr. Ahmed earned his Ph.D. in Medical Microbiology from Universiti Sains Malaysia, where his doctoral work explored immune checkpoint regulation in EBV-associated cancers. He previously obtained a Master’s in Microbiology from the University of Central Punjab and a BS (Honors) in Medical Laboratory Technology from the University of the Punjab. His education is complemented by certifications from professional bodies such as the Royal Society of Biology (UK) and the Malaysia Board of Technologists.

Experience

Dr. Ahmed’s career spans clinical diagnostics, academic teaching, and advanced research. As Assistant Professor at the University of Tabuk, he teaches medical sciences and contributes to curriculum design and quality assurance. His previous roles include Graduate Research Assistant at Universiti Sains Malaysia, where he managed research grants and ethics approvals, and Laboratory Technologist roles in top medical institutions in Pakistan. He has also served as a visiting lecturer in multiple universities.

Skills and Expertise

Assist. Prof. Dr. Naveed Ahmed possesses a diverse skill set combining technical, analytical, and linguistic competencies. He is fluent in Urdu and Punjabi, advanced in English, and has basic proficiency in Arabic. His programming expertise includes R for data cleaning, visualization, and statistical modelling, with proficiency in conducting systematic reviews and meta-analyses. He is skilled in data analysis software such as R, SPSS, RevMan, CMA, and OpenMeta, and proficient in Microsoft Office and LaTeX for document creation. His laboratory expertise spans advanced instruments including flow cytometry, PCR systems, ELISA readers, HPLC analyzers, hematology analyzers, and automated diagnostic systems.

Honors and Awards 

Assist. Prof. Dr. Naveed Ahmed has earned multiple prestigious recognitions for his academic and research excellence. He received the Graduate on Time Award and was nominated for the Best PhD Thesis Award at Universiti Sains Malaysia. His presentation skills and impactful research earned him the 2nd Place Oral Presentation and Young Investigator Award at the Regional Conference on Molecular Medicine and the National Conference for Cancer Research. He has twice received the Sanggar Sanjung Award for outstanding publications, along with awards for best oral and poster presentations. Additionally, he was awarded the USM Research Assistance Scheme for academic merit.

Research Focus 

Dr. Ahmed’s research focuses on infectious diseases, nanomedicine, antimicrobial resistance, and molecular diagnostics. He integrates in silico, in vitro, and translational approaches to address global health challenges, including the development of nanomaterials for diagnostics and therapeutics, computational vaccine design, and the study of emerging pathogens. His work bridges fundamental science and clinical application, with strong collaborations in Asia, the Middle East, and beyond.

Publications

A Review of In Silico and In Vitro Approaches in the Fight Against Carbapenem-Resistant Enterobacterales
Authors: Absar, M.; Zaidah, A.R.; Ahmed, N.; Nik Hashim, N.H.H.; Yean, C.Y.; Mahmood, A.; Ahmad, S.; Ejaz, H.
Journal: Journal of Clinical Laboratory Analysis (2025)

Carbon-Based Nanomaterials as Multifunctional Particles for Cancer Diagnosis and Treatment
Authors: Naveed Ahmed; Mai Abdel Haleem A. Abusalah; Muhammad Absar; Muhammad Sajid Noor; Bakhtawar Bukhari; Saira Ali Anjum; Kirnpal Kaur Banga Singh; Chan Yean Yean
Journal: Nano LIFE (2025)

The Microbial Sources of Bioactive Compounds: Potential Anticancer Therapeutic Options
Authors: Naveed Ahmed; Mai Abdel Haleem A. Abusalah; Muhammad Absar; Muhammad Hassan Nasir; Anam Farzand; Ijaz Ahmad; Zaineb Sohail; Kirnpal Kaur Banga Singh; Atif Amin Baig; Chan Yean Yean
Journal: Nano LIFE (2025)

ipaH-Targeted Electrochemical Genosensor: A Fast and Reliable Diagnostic Approach for Simultaneous Detection of Shigella Species and Enteroinvasive Escherichia coli
Authors: Pavithrah Shunmugam; Naveed Ahmed; Kirnpal Kaur Banga Singh
Journal: Microchemical Journal (2025)

Prevalence of Leptospirosis Infections Among Humans in Malaysia: A Systematic Review and Meta-Analysis
Authors: Mohd Yusof M.S.; Naveed Ahmed
Journal: Tropical Biomedicine (2025)

Exploring TGF-β Signaling in Benign Prostatic Hyperplasia: From Cellular Senescence to Fibrosis and Therapeutic Implications
Authors: Abida Khan; Hayat Ali Alzahrani; Shatha Ghazi Felemban; Alanood Saeed Algarni; Amani Baqqan S. Alenezi; Mehnaz Kamal; Zia Ur Rehman; Syed Mohammed Basheeruddin Asdaq; Naveed Ahmed
Journal: Biogerontology (2025)

Synthesis, and Biological Activities of Silver Nanoparticles Produced via Green Synthesis Method Using Cordyceps Militaris Aqueous Extract
Authors: Muhammad Afzal; Tayyaba Khan; Noshaba Mehmood; Romaisa Irfan; Ravish Fatima; Zeemal Seemab Amin; Naveed Ahmed
Journal: Nano (2025)

Conclusion

Assist. Prof. Dr. Naveed Ahmed demonstrates all the hallmarks of a top-tier researcher international collaborations, a strong publication record in Q1/Q2 journals, clinical and laboratory expertise, intellectual property generation, and leadership in medical science education. His contributions to infectious disease research, vaccine development, and nanomedicine strongly support his nomination and suitability for the Best Researcher Award.

Mr Edmond Didier Medongou Tejiogho | Sustainability in Material Science | Best Researcher Award

Published on by Material Scientist

Mr Edmond Didier Medongou Tejiogho | Sustainability in Material Science | Best Researcher Award

Mr. Edmond Didier Medongou Tejiogho is a dynamic civil engineering researcher specializing in sustainable construction materials. Currently pursuing a Master’s in Civil Engineering (Structures) at PAUISTI, Kenya, he holds a B.Tech and HND in Civil Engineering. His research explores innovative geopolymer-stabilized earth blocks for low-carbon construction. Edmond combines hands-on fieldwork 🏗️ with strong technical skills in AutoCAD, ArchiCAD, ETABS 💻, and project supervision. Multilingual in English, French, Fulfulde, and Pidgin 🌐, he brings cross-cultural fluency to international collaborations. His commitment to eco-friendly engineering solutions and academic excellence makes him a rising star in sustainable infrastructure development. 🏆🧪

Profile

ORCID

Education 🎓

Mr. Edmond Didier Medongou Tejiogho has a strong academic foundation in civil and technical sciences. He is currently pursuing an MSc in Civil Engineering (Structures) at the Pan African University Institute in Kenya (2023–2025) 🌍🏗️. He previously earned a Bachelor of Technology in Civil Engineering 🏗️ and a Higher National Diploma in Building Construction 🧱, both with Second Class Upper Division honors. Earlier studies included Computer Engineering 💻 and Computer Science, alongside excellent performance in GCE Advanced (5 papers) and Ordinary Levels (10 papers) 🧮📚. His academic journey reflects resilience, adaptability, and technical versatility. 🧠✅

Experience 🏗️

Mr. Edmond Didier Medongou Tejiogho has a solid background in both practical and academic civil engineering. With a B.Tech and an MSc focused on sustainable materials, he has conducted in-depth research on geopolymer-stabilized earth blocks 🧱. His fieldwork includes infrastructure development, structural assessment, and material testing across projects in Cameroon and Kenya. He has led student bodies, facilitated hands-on workshops, and contributed to educational outreach 📚. Proficient in Python and data analysis 💻📈, Edmond integrates computational methods into engineering design and problem-solving, blending traditional structural expertise with modern digital tools for sustainable development 🌱.

Skills 💻

Mr. Medongou possesses strong technical expertise in reading and interpreting civil engineering plans, monitoring and supervision of construction works, and design and execution of structural projects 🏗️. In addition, he excels as a French–English freelance translator 🌍. His computer proficiency includes advanced skills in Microsoft Word, Excel, PowerPoint, and Project 📊, making him effective in documentation and reporting. He demonstrates high-level mastery of engineering design software such as AutoCAD 2D/3D and ArchiCAD 📐, and solid working knowledge of ETABS for structural analysis and modeling—making him well-equipped for modern engineering tasks and project delivery. 🚀🧱

Research Focus 🧪

Mr. Edmond Didier Medongou Tejiogho’s research is rooted in the development of sustainable construction materials, with a strong emphasis on geopolymer technology for enhancing compressed earth blocks (CEBs). His work investigates the durability performance and structural behavior of earthen masonry walls under various conditions. By integrating metakaolin-based geopolymer binders, he aims to produce eco-friendly, low-cost alternatives to traditional cement 🧱♻️. His research aligns with global efforts to reduce the carbon footprint of the construction sector 🌍, advancing innovative solutions that promote resilient, green building systems for sustainable urban and rural development. 🏘️🔬🌿

Publication 📘

Flexural Performance of Ambient‐Cured Metakaolin‐Stabilized Compressed Earth Brick Walls With Cement‐Soil Mortar Joints

✍️ Authors:
Edmond Didier Medongou Tejiogho, Christopher Kanali, François Ngapgue, Isaac Fundi Sanewu

📚 Journal:
Engineering Reports

🗓️ Publication Date:
April 2025

Assoc. Prof. Dr Inigo Flores Ituarte | Sustainability in Material Science | Best Researcher Award

Published on by Material Scientist

Assoc. Prof. Dr Inigo Flores Ituarte | Sustainability in Material Science | Best Researcher Award

Assoc. Prof. Dr. Iñigo Flores Ituarte is a leading expert in digital manufacturing and additive technologies, serving at Tampere University and as an Academy Research Fellow in Finland 🏛️🔬. With a Doctorate in Mechanical Engineering from Aalto University, his research focuses on intelligent manufacturing, design digitalization, and sustainable production 🧠⚙️📈. He has authored 50+ high-impact publications, secured €11M+ in research funding, and collaborates globally across academia and industry 🤝🌐. Also a founding member of SelectAM, his work bridges innovation, education, and entrepreneurship in advanced manufacturing systems 💡📊🚀.

Assoc. Prof. Dr Inigo Flores Ituarte, Tampere University, Finland

Profile

SCOPUS

ORCID

GOOGLESCHOLAR

Education  🎓

Dr. Iñigo Flores Ituarte holds a Doctor of Science in Mechanical Engineering from Aalto University, Finland, with a dissertation on the digitalization of additive manufacturing 🧠⚙️. He also earned an M.Sc. in Mechanical Engineering from Aalto and a B.Sc. from the Autonomous University of Barcelona, Spain 🏗️📐. He is a Docent in Digital Design and Manufacturing at Tampere University and has completed advanced pedagogical training in Finland and Denmark 👨‍🏫🧩. Fluent in Basque, Spanish, and English, his academic journey blends technical mastery, teaching excellence, and cross-cultural expertise 🌍🧑‍🔧🗣️.

Experience 🏭

Dr. Iñigo Flores Ituarte has held key academic positions including Associate Professor in Digital Manufacturing at Tampere University and Academy Research Fellow at the Research Council of Finland 🎓🔬. His previous roles span Industry Professor at Tampere, Assistant Professor at Aalborg University, and Guest Associate Professor at DTU 🔧🏛️. His industrial experience includes positions at Nokia (3D printing specialist), Alstom Wind (O&M engineer), and Konecranes (sales engineer) ⚙️📊. He is also the co-founder of SelectAM, a tech spin-off applying AI in supply chain design 🤖📈. His career blends innovation, research, and global industry impact.

Awards and Honours 🏆

In 2023, Assoc. Prof. Dr. Iñigo Flores Ituarte was awarded the Academy Research Fellow (ARF) grant by the Research Council of Finland, one of the nation’s most prestigious and competitive recognitions for early-career researchers 🚀📚. This esteemed funding supports his salary, research team, and project costs, enabling him to lead cutting-edge, high-impact research that drives scientific innovation 🔬💡. Granted to individuals with the potential to become global leaders in their field, the ARF award underscores his rising influence and leadership within the international scientific community 🌍📈. It marks a significant milestone in his academic career.

Research Focus ⚙️

Dr. Iñigo Flores Ituarte’s research focuses on digital manufacturing, additive manufacturing (3D printing), and intelligent design systems 🖨️🔧. He explores the industrialization and scalability of additive technologies, bridging rapid prototyping and full-scale production for sectors like automotive and healthcare 🚗🏥. His work emphasizes technology validation, emissions analysis, and innovation policy, integrating digital twins and AI for smart, sustainable manufacturing ♻️📈. With a strong emphasis on application-based research and industry collaboration, he contributes to advancing next-gen production systems that are efficient, flexible, and digitally integrated across global supply chains 🌍🔄🤖.

Publications 📘

Digital manufacturing applicability of a laser sintered component for automotive industry: a case study 🚗⚙️
Authors: Iñigo Flores Ituarte, Sergei Chekurov, Jukka Tuomi, Julien Etienne Mascolo, Alessandro Zanella, Patrick Springer, Jouni Partanen
Journal: Rapid Prototyping Journal 📰

Additive Manufacturing Validation Methods, Technology Transfer Based on Case Studies 🔍🏭
Authors: Iñigo Flores Ituarte, Niklas Kretzschmar, Sergei Chekurov, Jouni Partanen, Jukka Tuomi
Book Chapter: Additive Manufacturing – Developments in Training and Education 📘

Additive Manufacturing in Finland: Recommendations for a Renewed Innovation Policy 🇫🇮🧩
Authors: Iñigo Flores Ituarte, M. Salmi, R.M. Ballardini, J. Tuomi, J. Partanen
Journal: Physics Procedia 🧪

Characterization of Emissions from a Desktop 3D Printer 🌫️🖨️
Authors: L. Mendes, A. Kangas, K. Kukko, B. Mølgaard, A. Säämänen, T. Kanerva, Iñigo Flores Ituarte, M. Huhtiniemi, H. Stockmann-Juvala, J. Partanen, et al.
Journal: Journal of Industrial Ecology 🌍

The ultrasonic burnishing of cobalt-chrome and stainless steel surface made by additive manufacturing 🔧🔬
Authors: Mika Salmi, Juha Huuki, Iñigo Flores Ituarte
Journal: Progress in Additive Manufacturing 📈

3D printing and applications: Academic research through case studies in Finland 🇫🇮📚
Authors: Iñigo Flores Ituarte, E. Huotilainen, A. Mohite, S. Chekurov, M. Salmi, J. Helle, M. Wang, K. Kukko, R. Björkstrand, J. Tuomi, et al.
Conference: Proceedings of NordDesign, NordDesign 2016 🎤

Challenges to implementing additive manufacturing in globalised production environments 🌐🏗️
Authors: Iñigo Flores Ituarte, Siavash H. Khajavi, Jouni Partanen
Journal: International Journal of Collaborative Enterprise 🤝